OBD2 Diagnostic Cable for VW, Audi, Skoda and Seat Made Between 1994 and 2004. Car ECU Scanner USB Cable Compatible for VAG KKL 409. (Blue)

Important Note: There is no CD inside the package, the driver and User Manual will be sent to you by Email. Contact our engineers for more technical support. Product Summary 1. Compatible for Volkswagen Audi Skoda an seats, compatible for most of cars made between 1994 and 2004. Read and Clear DTC trouble codes, read Control Modules, Code Modules, Adaptions. 2. Compatible for 3 different protocols with same OBD2 connector including ISO (ISO9141) ISO/KWP, VPW and PMW. 3. Support K but not CAN BUS. 4. Compatible for KKL409. 5. Support 32 bit XP and 32 bit Win7. Not support directly 64 bit Windows (VMware is required). Supported vehicles 1.for VW: 1)Compatible for Beetle/Bora/Caddy/Corrado/Golf MK2/G-olf MK3/Golf MK4/Jetta MK3/Jetta MK4/Lupo/Passat MK3/Passat MK4/Polo MK3/Polo MK4/Touran/Touareg/Transporter T3/Transporter T4/Transporter T5. 2)Not Compatible for Caddy (2K)/Golf MK5(1K)/Golf Plus/Jetta MK5 (1K)/Passat MK5(B6)/Passat MK6 (B6)/Phaeton/ 2. For Audi Models: 1) Compatible for A2/A3/A4 Cabriolet/A6/A8/S2/S3/TT 2) Not Compatible for 80/100/200/A3(8P)/A4(B7)/A6(C6/4F)/A8/A8L(D3/4E)/Q7 3.for Skoda: 1)Compatible for Fabia/Felicia/Octavia MK 1/Octavia MK 2/Superb 2)Not Compatible for Octavia (1Z) 4.for SEAT Models: 1)Compatible for Alhambra/Altea/Arosa/Cordoba/Ibiza/Inca/Leon MK 1/Leon M-K 2/Toledo 2)Not Compatible for Altea (5P)/Leon(1P)/Toledo (5P) How to use: Step 1: Plug in cable to computer / laptop Step 2: Install cable drivers (downloaded from the indicated Website) Step 3: Make any additional settings which your diagnostic software suggests Step 4: Set the switch on the VAG-COM to diagnose the desired ECU Step 5: Plug cable into cars OBD connector Step 6: Connect using the diagnostic software product Step 7: Fit for only.

• Application Scenes. Compatible for Volkswagen Audi Skoda and seats, compatible for most of cars made between 1994 and 2004. Read and Clear DTC trouble codes, read Control Modules, Code Modules, Adaptions. Please refer to Product Description below for supported car list in detail.
• Protocols Supported. Support terminal K bus communication, Terminal (L) ignition device for waking up ECU. Compatible for 3 different protocols with same OBD2 connector including ISO (ISO9141) ISO/KWP, VPW and PMW. The K Diagnostic interface cables works on ISO/KWP (Key Word Protocol) that were launched after 1996. Not support CAN -BUS.
• APP and OS Supported. Compatible for KKL409. Support 32 bit XP and 32 bit Win7. Not support directly 64 bit Windows (VMware is required). If your computer is running on 64 bit Windows, you can use VMware on 64 bit Windows to simulate 32 bit XP/Win7 environment.
• Converter Cable. Built in FTDI chip, USB A 2.0 to OBDII 16-pin male.
• Driver/APP must be installed for the cable. Made by Washinglee, provide Technical Support, including remote installation if necessary, and 1 year warranty. Scan the QR code printed on the label on the bag, you can find, download and install the Driver/APP. Also, User Manual and Driver/APP will be sent to you by Email via Amazon platform, if you didn’t receive it, please contact our engineers by Email for technical support. No CD inside the package.